To read the full detailed article with sound samples see: Fender Machete Review
The Fender Machete represents a new direction for the manufacturer. It’s not like they want to start to making cutlery but rather they want to enter the heavy distortion world. This strategical decision caused many reactions in the guitar world. So, with mixed feelings I leave the sandy roads and whiskey smell of Mississippi to enter the country of tattooed, long-haired musicians.
A Weapon for the Strong!
I receive the weapon under seal. It hardly fits the trunk of my car with the rear seats folded (for insiders, the JeyMobile looks a lot like the GarthMobile). I come to my place of destination and ask for help to take the cardboard box out of my car because it’s twice as large as me… Right after unpacking you’ll discover that the amp is much smaller than the box (big foam protections inside!) but still not lighter. The physical specs: 24.5″ x 11.5″ x 22″ and 71 lbs. The manufacturer had mercy on us and decided to add clipable casters so we won’t break our backs when transporting the amp. The two-color combo is protected by a black vinyl covering with white edging and a center stripe in the style of a roadster steering wheel. The front plate is made out of black steel and offers nice-looking, brushed-aluminum Telecaster knobs. The overall roadster look is faithful but it might not be everyone’s favorite.
Swiss-Army Knife or a Classic?
Let’s have a brief tech talk. Under the hood you’ll find five 7025 tubes (also called 12AX7), a pair of 6L6GC and a 12″ Celestion Vintage 30 speaker that matches the roadster look perfectly. The front and rear panel are fully packed. The engine offers two separate channels with Gain, Volume, Bass, Mid, Treble, and Notch controls each. The front panel also includes three selectors: a 6dB pad (for active pickups), a channel switch and a speaker damping selector (damping is the interaction between power tubes and speaker). Finally, the amp offers one reverb for both channels. A small disappointment is that the reverb is not a tube but a digital one…
On the rear you have Power and Standby switches, an effect loop with send and return level controls, a line output on XLR connector, MIDI in, footswitch connector, and a pair of speaker outs with impedance selector, as well as a pair of PA Mute (mutes the power amp) and Cab Emul (adds the speaker emulation to the line out) mini-switches. The included footswitch provides four options for channel selection, gain boost (ch.1), FX loop, and reverb. It is equipped with two connectors: one for the amp and a second one to chain an additional Machete footswitch (can be useful on large stages). Something tells me it’s time to plug my axe now.
Let’s take a closer look and a listen…
Fender’s goal was to offer an aggressive sounding combo to the tattooed, hairy metal community and they have succeeded! The amp is sturdy, so it can be taken on stage and to the studio or stay at home. Moreover, it offers a wide range of clean sounds plus everything from crunch to heavy distortion, while the Notch control allows you to fine-tune your tone. Unfortunately, the amp’s street price of around $1,900 is quite high. Quality has a price, and if you like it, you’ll pay for it…
- The sound!
- Both channels
- Notch control
- FX loop
- Damping control
- Footswitch provided