AVID, formerly Digidesign, took advantage of last year’s re-branding to present the third generation of its digital audio budget interfaces: the Mbox series. Today, we’ll give the Mbox Pro a try, the biggest member of the family.
For many years, Mbox interfaces were the entrance ticket to Pro Tools and were an essential tool for home studio owners who wanted to use the famous Digidesign (now AVID) platform. But things have changed a lot recently and now Pro Tools 9 can be used with any digital audio interface. The Mbox series also changed. Even if they already supported other sequencers in the past, they can now be used (and more than ever) with other programs like Cubase, Logic and company. However, the link between Pro Tools and the Mbox is still very strong, especially in terms of some very appealing bundles. Let’s start by unpacking the Mbox Pro.
Out of the Box
Inside the nice black box with the AVID logo is the interface itself, which makes a good impression at first sight. The design is very appealing, professional but not austere. It looks quite sturdy due to the fact that it has a metal housing and not less due to its heaviness (6.2 lb!). With such a weight, you can be sure it wont slip down from your desk! The dimensions are also generous: 13.7″ x 7.6″ x 2.3″. The knobs are made out of plastic but seem quite rugged. The look of the new Mbox generation is pretty convincing. AVID did a very nice job compared to former versions. However, mobile sound freaks will find that the weight and bulky dimensions of the Mbox Pro are no advantage. In that case we recommend the Mbox and Mbox Mini, which are lighter and ought to be enough if you don’t need many ins/outs. However, it’s important to point out that the three interfaces don’t have the same specs (S/N ratio, dynamic range, etc.), so the differences between the three models are not limited to the number of connections.
Now, let’s have a look at the front and rear panels…
On the well-equipped rear panel you have six analog outs and four analog ins on 1/4″ TRS jacks with switchable +4dBu/-10dBV sensitivity. You also get four inserts on 1/4″ TRS jacks. The inserts are placed between the preamp and the A/D converter in the signal path. The effect send and return are in the same TRS jack (tip=send, ring=return, sleeve=ground). You also get a stereo Aux input on RCAs or minijack. On the right corner there are two mic inputs (3 and 4) on XLR connectors, while on the left corner you have a pair of FireWire ports. Notice that the interface must be connected to its external PSU because it cannot be powered via the FireWire bus of the computer. A 1/4″ footswitch jack will allow you to punch in and out while recording or start playing back audio — very practical! Finally, a D-Sub port provides you with a MIDI in/out on 5-pin DIN connectors, a coaxial S/PDIF connector and a BNC to feed it a wordclock signal using the provided breakout cable. The only regret of the connections is the lack of an ADAT connector!
The front panel is also very comprehensive: a pair of XLR/TRS combos for mic inputs 1 and 2 and the two instrument inputs. They all have two switches: the first one to switch between the front inputs 1/2 (mic and instrument) and the two rear line inputs, and the second one to activate the soft limiter (which is a very rare feature on interfaces in this price range). Also notice that all four gain controls are push/pull pots allowing you to activate -20dB pads. In the middle of the front panel, you’ll find four meters with eight-LEDs each. Nice! Next to the meters, there are two buttons: the first one can be assigned to different Pro Tools functions (we already mentioned that the link between the house’s own hardware and software is still strong!) while the other one allows you to turn the 48V phantom power on/off.
You also get two fully independent headphones outputs: they are assigned to different channels and have their own volume control. Sweet! On the right corner you’ll find a big volume control as well as three keys assigned to the master out: a Dim/Mute switch that allows you to cut or decrease the volume of the main output, a Mono switch, and a Speaker button to toggle between three pairs of monitor speakers connected to the analog outs on the rear panel. Once again: very nice!
Now, let’s talk about the software…
The new Mbox Pro interface is a success: it offers a very nice design, it is robust, provides very comprehensive connections, and includes an easy-to-use virtual mixer. Add the effect section and you get a very appealing audio interface, even if it is not perfect. In fact, we missed an ADAT in/out and some additional effects like an EQ and/or a compressor. Moreover, the weight and the size of this interface are not that convenient for mobile recording.
When it comes to software, although the system worked perfectly with Cubase, we recommend to use it with Pro Tools for several reasons. First, the convenient Multi button you can assign to different functions, but especially because of the Pro Tools 9 bundles that can save you up to $200 on the sequencer price (the Mbox Pro alone costs $729 and only $999 with Pro Tools 9). Users of other sequencers might want to check competitor products that provide more features for the same price. But if you are looking for a high-quality audio interface and want to start working with Pro Tools 9 without spending a lot of money, the Mbox range is the way to go.
- Nice design
- Comprehensive analog connections
- Good sounding preamps and converters
- Virtual mixer
- Integrated reverb and delay effects
- Appealing bundle price with Pro Tools 9
- A bit expensive without bundle
- Heavy and bulky
- No ADAT connection
- No EQ nor compressor in the FX section
To read the full detailed article see: Avid MBox Pro Review